To cut your firewood, all you need is to get a chainsaw. It allows you to carry out your pruning, felling, or cutting tasks without the help of anyone. Today’s chainsaws are specially designed to be maneuverable, efficient, and safer, but be aware that their use remains a delicate operation that does not forgive the slightest mistake. But how can you cut well with a chainsaw without risking injury or damaging it? Here are some answers in the following lines.
It all starts with good protection
To cut well with a chainsaw, you must equip yourself with the appropriate personal protective equipment that meets current standards. That said, you should wear a helmet, goggles, and a mesh face shield. These PPE will protect you from flying wood particles, chips, and splinters. Next, to guard against the risk of cuts, opt for cut-resistant pants or chaps and cut-resistant gloves. You should also wear safety shoes with reinforced toe caps to protect against crushing. Also, consider wearing hearing protection when using a gas chainsaw.
Further reading : How to Properly Define the Edges of Your Lawn?
Additionally, if you prefer to live in the city, first, respect the noise regulations. Secondly, check with your town hall to find out the permitted hours for using this machine. Once you have your PPE, you can easily use your chainsaw. So, make your choice at https://www.tronconneuse.xyz/ryobi-ocs1830/ for all your cutting needs.
Cut the logs on the ground
You may also like : Spring: how to properly maintain your lawn?
When the log is on firm ground in the woods or in your garden, you have the option to cut it on-site. However, make sure that the log cannot roll. If the branch seems unstable, you can stabilize it with pieces of wood. But do not cut into the ground, as this will quickly dull the chain. Regarding this aspect, you should first start your chainsaw, but at low speed. After that, position the blade above the marks you made. Cut through three-quarters of the width of the log and do the same for all marked pieces. This way, you avoid accidentally sawing into the ground. Secondly, you will turn the log using a felling lever and ensure that the log is stable. Finally, you can cut the last quarter of the width of the log.
Cut a log using a support
If you are faced with unstable ground, you need to use a support. This way, you protect the chain of your chainsaw and your back by working at a more appropriate height. To benefit from a support, you need to cut a piece of the log by making a V-notch that should be wider than the log itself. Then, ensure that the support is stable so you can place the log on it. Here, you can use a manual clamp. You can then use your machine at low speed to start sawing on the marks. But make sure that the cut piece does not fall on your feet. Additionally, it may happen that you slide the log to avoid cutting into your support. You will repeat this action several times until the log has been cut.